Loading... Please wait...

Railroad Spill Containment

railroad-spill-containment-loading-deck.jpg

Capture Hazardous Spills From Railroad Tanker Cars

  • Ultra-Track Pans have been designed to provide railroad spill containment at industrial rail sidings and locomotive maintenance facilities. Available in virtually any length, Ultra-Track Pans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
  • Prevent costly cleanup and regulatory fines from railcar spills and chemical spills.
  • Modular Design - Center and Side Pans are 53.5" long; railroad spill containment areas can be easily assembled to any length desired
  • All-polyethylene Construction - Rugged Track Pans withstand harsh chemicals and are designed to function in temperatures ranging from -40°F to +140°F
  • Sealed System - Polyethylene gaskets keep spills from falling between the rails and Pans.
  • Trucks and other vehicles can drive over Track Pans with grates in place (NOTE:  To drive over Track Pans, firm footing must be beneath the Pans; also must "ramp up" to Side Pans with asphalt or concrete)
  • An economical, easy to install railroad spill solution.
  • Modular Track Pan design can be customized to meet your specific railroad spill containment needs.
     
  • Optional Track Pan Covers Keep Rainwater Out of the Pans, Providing Effective Stormwater Management.
  • Polyethylene Covers are left in place until the railcar(s) arrive to be off-loaded or loaded. Lightweight covers mechanically lock into the polyethylene decking and will not blow off in windy conditions.
  • Unique stormwater feature is designed to eliminate "pooling" of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.
  • Ultra-Track Pans Are Available In Two (2) Models:Low Maintenance - unlike carbon steel track pans, Ultra-Track Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
    • Track Pans and Grates, No Covers
    • Track Pans with Grates and Covers
  • Low Cost Installation — Lightweight Track Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
  • Slip Resistant Surfaces - Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
  • Long Work Life - Estimated to perform 20-30 years; longer than fiberglass pans.
  • Meets SPCC and EPA Stormwater Management Regulations.
  • Also meets New York State Chemical Bulk Storage Regulation Section 599.17c — Secondary Containment for Transfer Stations.
ULTRA TRACK PANS
 Track Pans with Grates, No Covers  Track Pan Covers Only
 Part# 9566 - Center Track Pan with Grates  Part# 9580 - Cover for Center Track Pan
 Dimensions:  53½" x 53½" x 6" (1359 mm x 1359 mm x  153 mm)  Dimensions:  55" x 52½" (1397 mm x 1333 mm)
 Weight:  112 lbs. (51 kg)  Weight: 24 lbs. (11 kg)
Containment Capacity: 18 gallons (69 L)*  Containment Capacity: -
 Includes:  2 bulkhead fittings, 4 gaskets and 2 grates  
 Part# 9576 - Side Track Pan with Grates  Part# 9581 - Cover for Side Track Pan
 Dimensions:  53½" x 27½" x 6" (1359 mm x 699 mm x 153  mm)  Dimensions:  55" x 28 1/4" (1397 mm x 717 mm)
 Weight:  58 lbs. (26 kg)  Weight: 11 lbs. (5 kg)
 Containment Capacity: 19 gallons (72 L)*  Containment Capacity: -
 Includes: 1 bulkhead fitting, 2 gaskets and 1 grate  Includes: -
 *Because of wheel flange clearance the effective height of the Center Pans is shorter than the effective height of the Side      Pans causing the Center Pans to have less capacity than the Side Pans.
Complete Railroad System
 9-Foot Railroad Spill Containment Systems:
 Part# 9595 - Two (2) Center Pans, four (4) Side Pans. No  covers 
 Part# 9596 - Two (2) Center Pans with Covers, four (4) Side  Pans with Covers 
 40-Foot Railroad Spill Containment Systems: 
 Part# 9589 - Nine (9) Center Pans, eighteen (18) Side Pans. No covers
 Part# 9590 - Nine (9) Center Pans with Covers, eighteen (18) Side Pans with Covers 
 60-Foot Railroad Spill Containment Systems: 
 Part# 9592 - Fourteen (14) Center Pans, twenty-eight (28) Side Pans. No covers 
 Part# 9593 - Fourteen (14) Center Pans with Covers, twenty-eight (28) Side Pans with Covers
 Options:
 Part# 9584 - Rebar Fasteners with Protective Caps (20-pack)
 Part# 9559 - 3" dia. Bulkhead Fitting (for below grade piping)
 Part# 9571 - Grate Only for Center Pan (Left),  Part# 9571 - Grate Only for Center Pan (Right)
 Part# 9573 - Grate Only for Side Pan
    There are no products in this category.
 

newsletter

Copyright 2017 The Spill Source. All Rights Reserved.
Sitemap | email customer service or Call 866.610.3596 8am-8pm M-F EST


visaamexmastercard